San Diego Vista processing floor
Toll processing · San Diego, CA

Welcome to San Diego Vista Steel Service Corp.

San Diego Vista Steel Service Corp. dedicates 100% of our resources to support our customers, with the highest technology in toll processing and inventory management. We have master coils, slitted coils, sheets & blanks cut to customer needs.

Request a Quote Processing Capabilities
2009 In operation
59,509 sqft Under roof
4 Processing lines
ISO 9001 :2015 certified
Your local supplier

Located minutes from the US / Mexican border

San Diego Vista Steel Corp. is your local processing and metal supplier. Located strategically near the US / Mexican border, we supply California and Baja California customers with shorter lead time and rapid response in order to meet our customer production demand. We offer inventory management, JIT, stock in finish goods and many more benefits for being local.

Our equipment allows us to meet our customer quality requirements and exceed commercial standards. San Diego Vista Steel Service Corp. can process your coils in Electro Galvanize, Galvanize, Painted coils, Cold Roll, Stainless, Aluminum and many more.

Inventory management Master coils and finished goods held and managed on your behalf.
JIT delivery Short lead times and rapid response for California and Baja California.
Toll processing Slitting, leveling, cut-to-length, blanking and shearing to your spec.
Global sourcing Backed by Hanwa Co. Ltd, with 100 locations worldwide.
Brief history

Established by Hanwa Co. Ltd in August 2009

San Diego Vista was established by Hanwa Co. LTD, (in August 2009) with more than 70 years of experience with 100 locations worldwide (hanwa.co.jp)

Dedicated to meeting the needs of customers in a broad spectrum of industries, the Hanwa Steel Division handles everything from steel plates, sheets and bars to construction materials.

San Diego Vista has an experienced team in the toll processing industry, dedicated to provide best quality and service on every order. We have confidence in each product that we sell.

We provide service to a variety of industries, from small electronic and medical components to HVAC and construction builders. Our sourcing capacity is back up by Hanwa, which allows outsourcing overseas and providing the best product at the most competitive price of the market.

San Diego Vista Steel Service Corp. facility
Summary
Capital US$5,200,000
(Hanwa Co.,Ltd 100%)
Operation August 3rd, 2009
Land 4.236 Acres (17,142 m2)
Building 59,509 sqft (5,529m2)
Industries served
Automotive Home Appliance Electronic HVAC Elevators Fab. Metal Mechanic Construction Shipbuilding Food Equipment Metal Furniture Medical And many more
Processing

Four lines, built for tight tolerance

Open a line to see its full specification. Call for special orders that require tight tolerance and different sizes.

Slitter Line TOTO Engineering, Japan
–
Gauge 0.25mm ~ 2.50mm (0.010"min ~ 0.118"min)
Master coil width 500mm ~ 1,550mm (19.685" ~ 61.024")
Uncoiler / recoiler ID 508mm (20") or 610mm (24")
Coil ID Max. 2,000mm (78.7")
Coil weight Max. 18mt (40,000 lbs)
Line speed 300 Meters/Minutes
Number of slit cut 2.3mm> 8cuts 1.2mm>23cuts 0.8mm>30cuts
Tensile strength Max. 50kg/mm2
Width of slit coil Min 16mm (0.62") depend on thickness
Tension facility Belt bridle (Japan Development Consultants)
Width tolerance +/- 0.15mm or +0/-0.30mm
Slitter Line
Leveler Line 1 TOTO Engineering, Japan
+
Leveler Line 2 Yonemori, Japan · since August 13th, 2012
+
Shear Cincinnati, USA
+
Material handling

Cranes and lift trucks

Over head cranes 25mt capacity Over Head Crane x2
10mt capacity Over Head Crane x2
Fork lifts (capacity) 13,000lbs (5.8mt)
11,000lbs (5.0mt) Max Container Load
8,000lbs (3,6mt)
Over head cranes Lift trucks
Product line

Steel products available on coils, slits, sheets cut to size

01

Electro Galvanized

Type: Secc20/20, AF /AGEG black/white, EG Anti-scrash, Anti fingerprints, Prepainted, EDD, Chrome free, QS1D/ & others

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''
02

Galvanized and Galvalume

Type G30, G40, G60, G90 & G120. Zero spangle, mid spangle and regular spangle.

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''
03

Galvannealed

Type A40 / A60

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''
04

Cold Rolled Steel Coil & Sheet

Type: Low Carbon, Aluminum Kill, EDDS, HSLAS & others

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''
05

Pre-Painted Electro Galvanized Steel Coil and Sheet

Colors: request about available colors and Mill production capacity

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''
06

Stainless Steel Coil, Sheet, Bars, pipes, plates, etc.

Type 316L / 304L / 301L / 430 / 441 / 201 & other alloys

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''
07

Aluminum and Alloys coated Steel Coil and Sheet

Type 3003 / 5052 / 6061, other upon request

Gauges: 11ga to 28ga Widths: 1'' to 60'' Lengths: 11'' to 199''

Need a grade that isn't listed?

Our sourcing capacity is backed by Hanwa. Tell us the spec and we will quote it.

Request a Quote
Quality policy

Seven principles, one management system

ISO 9001:2015 certified company

We have established this quality policy to be consistent with the purpose and context of our organization. It provides a framework for the setting and review of objectives in addition to our commitment to satisfy applicable customers', regulatory and legislative requirements as well as our commitment to continually improve our management system.

Our policy is also to meet the requirements of other interested parties and in meeting our social, environmental, charitable, regulatory and legislative responsibilities. We have produced quality objectives which relate to this policy and they can be found in documented Planning Quality Objectives Procedure, QP-6.2. This policy is available/communicated to all interested parties as well as being made available to the wider community upon request.

01 Customer focus As an organization, we have made a commitment to understand our current and future customers' needs; meet their requirements and strive to exceed their expectations.
02 Leadership Our Top Management have committed to creating and maintaining a working environment in which people become fully involved in achieving our objectives.
03 Engagement of people As an organization, we recognize that people are the essence of any good business and that their full involvement enables their abilities to be used for our benefit.
04 Process approach As an organization, we understand that a desired result is achieved more efficiently when activities and related resources are managed as a process or series of interconnected processes.
05 Improvement We have committed to achieving continual improvement across all aspects of our quality management system; it is one of our main annual objectives.
06 Evidence-based decision making As an organization, we have committed to only make decisions relating to our QMS following an analysis of relevant data and information.
07 Relationship management We recognize that an organization and the relationship it has with its external providers are interdependent and a mutually beneficial relationship enhances the ability of both to create value.
The facility

Inside 8753 Kerns St

Processing floor with overhead cranes
Processing floor — 25mt and 10mt overhead cranes
Master coil inventory
Master coil inventory
Slit coils on pallets
Slit coils, banded and palletized
Cut to size sheet inventory
Cut-to-size finished goods
Loading and unloading bay
Loading & unloading under crane
Stock coils
Stock coils held for JIT release
Entrance sign
Kerns St entrance
Contact

Request a quote

Send us the material, gauge, width and volume you need. We will come back with lead time and pricing.

Main line +1 619-671-9247 Fax +1 619-671-9210  ·  Mon–Fri, 7 a.m. – 8 p.m. PT
Sales contacts
Masaru Abe Sales Manager
Tel +1 619-671-9247 US mobile +1 619-650-2266
abe-masaru@hanwa.co.jp
Angel Ramos Management Sales Consultant
Tel +1 619-671-9247 ext. 208 MX mobile +52 1 664-388-0888
hstj-sales004@hanwa.co.jp
Plant & office San Diego Vista Steel Service Corp.
8753 Kerns St
San Diego, CA 92154, USA
Open in Google Maps →
Location Otay Mesa, minutes from the US / Mexico border

Serving California and Baja California customers with short lead times, JIT release and stock in finished goods.

San Diego Vista Steel Service Corp. facility exterior